Rammed Earth
This is produced using a mix of soil and cement to obtain an impervious wall. It is built onsite, using formwork to hold the compacted material while it hardens. It is a single layer impervious wall. Although it sounds environmentally positive there are some real issues.
Because of the high level of mass and the direct contact with the external environment, stored heat or cold will be transmitted to the internal environment. Sun contact on a wall will heat the wall up and it will maintain the warmth. This will then be transmitted internally. An unsatisfactory outcome in summer.
It is common practice to provide weather protection by the use of verandahs. Like brick construction internally, it can moderate internal temperatures if used internally.
You may also like
Tips for pre-start
Hear from our New Homes Administrators (NHA) Pre-start is an exciting part of the home building process as it’s when you can start to really visualise how your complete new home will look! But it can also be a daunting period as the selections chosen at the time will ...
Double brick vs brick veneer construction
Practical implications of double-brick structures and timber-framed structures In Perth, it is assumed that double brick construction is the best construction method due to its popularity, however this isn’t necessarily the case. The best construction method for your new home depends on a number of factors including your block ...
Double Clay Brick and Slab on Ground
Double Clay Brick and Slab on Ground is the most conventional method of construction in WA. There is a cavity between the outside layer of brick and the inside layer so that moisture doesn’t penetrate into the home. The external layer is either in a face brick or can ...
