Brick Veneer
Brick Veneer is the most common method of construction in Australia, but is rarely used in the sand plain coastal regions of Western Australia. It utilises either steel or timber framing internally with a skin of face brick externally. Alternatively, the outside layer of brick could be a utility brick that is rendered.
Brick Veneer is a preferred method in wet or temperate conditions as the framing can be built and the roof can be put in place before the outside brickwork is installed, speeding up the construction process. It is also easier to alter the home internally once constructed. This process eliminates wet wall issues in construction in temperate conditions. It is also important to insulate the walls as it does not have the same thermal qualities as double clay brick.
You may also like
What to look for in a home builder
1. A builder’s range of home designs will give you a good insight into what they can and can’t do, and how flexible they are if you want to make changes to your design. Keep in mind a 3 bedroom home can be easily converted to a 4 bedroom design – and ...
Integrated Construction
What is it? Integrated Construction is the use of timber or steel framing utilising various forms of external cladding materials to provide weather protection and interesting architectural aesthetics. It is usually constructed using slab on a sand pad or waffle pod slab directly in contact with the ground. This form ...
Reverse Brick Veneer
Reverse Brick Veneer is a thermally dynamic form of construction. It has the advantages of the aesthetics of a framed home and improved thermal efficiency over double brick. The mass of the brickwork moderates the internal temperature while the external lining provides the waterproofing to the home. Insulation between the ...
